Station Name, Vendor | Cabletron Systems TRMMIM guide

Using the TRMMIM Hub View

2.Drag down to Station Status and release. The Station Status window, Figure 2-9, will appear.

Figure 2-9. The Station Status Window

Station Name

This text ﬁeld can help identify the attached station; the information entered here is not displayed anywhere else in the Hub View.

Module/Port

Indicates the module (board) and port index of the selected interface.

MAC Address

The physical (hardware) address of the station connected to the interface in MAC (Ethernet) or Canonical (Token Ring) format.

Vendor

This ﬁeld displays the name of the attached device’s manufacturer (if known), as determined by the ﬁrst three bytes of the MAC address.

Upstream Neighbor/Downstream Neighbor

These ﬁelds display the MAC addresses of the attached station’s neighbors on the ring.

2-18	Monitoring Hub Performance

Image 34

Cabletron Systems TRMMIM manual Station Name, Vendor, Upstream Neighbor/Downstream Neighbor

Contents

Trmmim Page Virus Disclaimer Restricted Rights Notice Applicable to licenses to the United States Government only Contents Chapter Ring Map Chapter Alarm ConﬁgurationChapter Statistics Chapter Ring Security Conﬁguration Appendix a Trmmim MIB Structure Contents Using the Trmmim User’s Guide Trmmim What’s not in the Trmmim Guide Introduction to Spma for the Trmmim Conventions Screen Displays Introduction to Spma for the Trmmim Using the Mouse Button Getting Help FTP Trmmim Firmware Introduction to Spma for the Trmmim Trmmim Firmware Using the Trmmim Hub View Using the Hub View Using the Trmmim Hub View Navigating Through the Hub View Hub View Front Panel Trmmim Hub View Device Name UptimeTime and Date Device Location Using the Trmmim Hub View Using the Mouse in a Hub View Module Module Index FNB Bypass State Hub View Port Color Codes Port Display Form Total Bytes ErrorsFrames Port Type FNB Display Monitoring Hub Performance Using the Trmmim Hub View Checking Device Status and Updating Front Panel Info Name and Location Date and Time Checking Module StatusContact Total Rings Module Name Speed FaultSpeed Fault Location Module Port Name Admin StateChecking Port Status Module/Port Link State Time Checking Station StatusInsertion Trap Vendor Station NameUpstream Neighbor/Downstream Neighbor Port Mapping Physical LocationPriority Reverse MACs Checking Ring Port Status Conﬁguring Station Name, Location, or Priority Class Fault State TimeMedia Fault Media Type Checking Statistics Burst BytesLine Abort Managing the Hub at the Device Level Managing the HubFind MAC Address Setting the Polling Intervals 12. The Find MAC Address Window 13. Trmmim Polling Intervals Contact Status Port Operational State Device General StatusDevice Conﬁguration Statistics Managing the Hub at the Module Level Controlling Token Ring FNB Multiplexer Connections INS Right Connect BoardLeft Connect Bypass Controlling Token Ring Speed Clearing the Module FNB Conﬁguration Window Selections Auto AUT Controlling Token Ring MIM Management ModeEnabling All Ports on Token Ring Modules Management MGT Converting a Station Port to a Ring-out Port Managing the Hub at the Port LevelEnabling and Disabling Station and Ring Ports Removing a Station from the Ring Ring Map From the icon From the command line stand-alone modeLaunching the Ring Map From the Hub View Selecting a Ring to Map Ring Name Ring Map Name SpeedStations Utilization Viewing Station-speciﬁc Information Quick Info Popup Window Board and Port Drop Setting a Station Name Performance and Errors Setting a Station Drop Viewing Management Station Conﬁguration Commands Error Status Open Status Error Active Monitor Error Report Timer Setting the Statistics Calculation ModeViewing Ring-level Information Viewing the Error Table Set Calculation Mode Window Error Table Window Total Errors Isolating Errors Non-Isolating Errors Changing the Station Labels Viewing Device Information Setting the Map Poll Interval Device Information Window Ring Purges Viewing Beacon HistoryActive Monitor Changes Beacon Events Longest Beacon Last Beacon TypeLast Beacon Beacon Conﬁguration 12. The Beacon Conﬁguration Window Using the Find Options Searching by Station Name, MAC Address, Board/Port, or Drop 13. Sample Find Windows Finding the Active Monitor on the Network Finding the Management Station on the Network Frames or Errors measured/Δ Time in seconds Accessing Other Spma Applications 14. Sample Find Highest and Lowest Windows Alarm Conﬁguration Spmarun e5alarms IP address community name Setting and Viewing Ring Alarms Alarm Conﬁguration Setting and Viewing Station Alarms Setting a Ring Level Alarm Alarm Conﬁguration Alarm Conﬁguration Alarm Conﬁguration Setting a Station Level Alarm Alarm Conﬁguration Setting and Viewing Station Alarms Using Statistics Statistics Viewing the Ring Station List Spmarun e5stats IP Address community name Upstream Addr Module and PortStn Name Downstream Addr Monitoring Ring and Station Statistics Using the Reverse MAC ButtonRefreshing the Station List Creating a Pie Chart Creating a Graph or Meter Click mouse button 1 on Protocols Ring and Station VariablesGeneral KBytes Burst Error Isolating ErrorsLine Errors AC Error Abort Error Non-Isolating ErrorsInternal Error Token Errors Frequency Errors Statistics Ring and Station Variables Ring Security Conﬁguration About Ring Security Launching the Security Conﬁguration Window Ring Security Conﬁguration Security Conﬁguration Ring Selection window, -1, will appear Disallowed Station List Allowed Station ListAllowed Count Disallowed Count Disable Security Security Mode OptionsEnable Security Allowed/Disallowed List Conﬁguration Buttons Conﬁguring Security Building the Allowed List Automatically Deleting Stations from the Allowed or Disallowed Lists Station Addition Window Clearing All Entries in the Allowed or Disallowed List Clear List Window Changing the Ring Security Mode Remove Ietf MIB Support Trmmim MIB Structure Snmp Agent Chassis MGRProtocol Stack Network One, Network Two Brief Word About MIB Components and Community Names Telnet Trmmim MIB Structure Index Index-2 Index-3 Index-4