Ring Map
Figure 3-12. The Beacon Configuration Window
3.In the Beacon Recovery field, click in the appropriate field toEnable or Disable the ABRP capability. ABRP is enabled by default.
4.In the Ring Port Enable Retry field, click and drag the scroll bar to select the number of times disabled ring ports will be retried to see if the beaconing condition clears. Selecting a setting of Infinite (by dragging the scroll bar all the way to the right) will cause the TRMMIM to continue retrying faulty ring ports until the beaconing condition clears; selecting a setting of Disabled (by dragging all the way to the left) will disable this feature. Other allowable values are 1 to 100.
5.In the Ring Port Retry Delay field, click and drag the scroll bar to select the interval, in seconds, between ring port retries.You should select a value which is a multiple of 7; values which are not divisible by 7 will be rounded down to the nearest appropriate value.
6.In the Station Port Enable Retry field, click and drag the scroll bar to select the number of times disabled station ports will be retried to see if the beaconing condition clears. Selecting a setting of Infinite (by dragging the scroll bar all the way to the right) will cause the TRMMIM to continue retrying faulty station ports until the beaconing condition clears; selecting a setting of Disabled (by dragging all the way to the left) will disable this feature. Other allowable values are 1 to 100.
Viewing |
