Gaggia Espresso Machine FACTORY SETTINGS, 14 LEGAL INFORMATION, RINSING CYCLE, ENGLISH, machine, • The display will show:, enable it by pressing “MENU/OK”

ENGLISH

ON/OFF TIME

OFF9:30

then press “∧” or “∨” to set the minutes and memorise the setting by pressing “MENU/OK”.

Warning: if the on/off time settings coincide, the machine will ignore both. After the times have been set, the clock must be activated in order for the function to work.

Activating the automatic on/off function

Note: activating this function makes sense only if you have already set the on/off times.

• Press “∧” or “∨” to select the function:

CLOCK

enable it by pressing “MENU/OK”.

• The display will show:

CLOCK

OFF

In this case pressing “MENU/OK” will deactivate the function. Choose to activate the function by pressing “∧” or “∨” and when

CLOCK

ON

appears, memorise the setting by pressing “MENU/OK”.

When you exit the programming mode, the machine will check the set parameters. If the current time falls within the set deactivation time, the display will indicate:

ENERGY SAVING

Note: during the set deactivation period, the machine can be restarted at any time by pressing “MENU/OK”.

Later, to deactivate the machine again, go into the programming mode by pressing “MENU/OK” and exit immediately by pressing “ESC”.

RINSING CYCLE

With this function, all the parts involved in the coffee dispensing process undergo a washing cycle with water.

During the wash cycle it is recommended that a person be on hand to supervise the operation.

• To start the wash cycle, press “∧” or “∨” to select the function:

RINSING CYCLE

to enable the function press “MENU/OK”. Press “MENU/OK” again to start the wash cycle.

•When the wash cycle is completed, the following message will appear.

FILL WATERTANK

At this point fill the water tank. The machine will automatically switch to the normal operating mode and the following message will appear on the display:

SELECT PRODUCT

READY FOR USE

FACTORY SETTINGS

This function allows you to restore all the machine operating parameters originally set by the manufacturer.

•After accessing the programming mode, press “∧” or “∨” to select the function:

FACTORY SETTINGS

then enable it by pressing “MENU/OK”. The following indication will appear:

FACTORY SETTINGS

NO

•Choose whether you want to restore the factory settings by pressing “∧” or “∨” and press “MENU/OK” to confirm your selection.

Caution: when you restore all the factory settings, you will lose any custom settings you have made on the

machine.

14 LEGAL INFORMATION

•This instruction book contains the information you need in order to use and upkeep your appliance correctly.

•The information should be viewed as a guideline for using and upkeeping your coffee maker in safety. The information is not exhaustive. For additional information or for information on topics not covered or inadequately covered in this instruction book, please contact an authorized service centre or the manufacturer directly.

• 38 •