Gamber Johnson 7160-0487, 7160-0486 Docking And Undocking The Computer, To Undock The Computer

DOCKING AND UNDOCKING THE COMPUTER

Figure 1

1.Turn the computer off.

2.With the slide plate in the open position, insert the bottom of the computer into the docking station. Make sure the guide tabs are lined up with the pockets on the back side of the computer.

Rotate the top of the comptuter under the top hooks until the computer is resting on the two vertical walls sticking out from the slide plate.

(see Figues 1, 2 & 3)

(Note: If your FZ-G1 computer has an extended battery or card slot attachment on the back side, you will need to remove the guide block from the face of the dock before inserting the computer.)

3.Push downward on the slide plate to latch the dock. (See Figure 4)

4.(Optional) The key lock can now be used for security purposes.

TO UNDOCK THE COMPUTER

1.Turn the computer off.

2.Unlock if locked.

3.Press the Latch Button. The slide plate is spring loaded and should raise with your hand when you release the button.

4.Rotate the top of the computer out of the dock to remove.

Vertical Walls

Guide Block

Guide tabs

Figure 2

Figure 3

Figure 4