| Fitting the grass box: |
| E |
| c |
GB | d |
| |
| F |
1.Place the box cover E on the grass box F from above in such a way that ALL the eyes c are positioned over the hooks d.
2.Press the box cover E on to the grass box F until the hooks d engage securely.
3.Inspect: Check that all the hooks d are engaged securely.
4. Operation
Connecting to power supply:
G | H |
12
DANGER!
ACutting tool can cause injuries!
V Wait until the cutting blade is stationary before undertaking any adjustment work, wear suitable work gloves and pull out the mains plug.
1.Push connector of the extension cable G on to the connector of the plug switch D.
2.Draw a loop of the extension cable G through the cable strain relief device H 1 and suspend in position 2.
This prevents inadvertent disconnection of the plug and socket connection.
3.Insert extension cable G into a mains socket.
D |
Starting the mower:
0 | J |
I |
G |
D |
DANGER! Risk of injury if the mower does not switch
Aoff automatically!
V Do not remove or bypass the safety devices (start button, switch handle).
1.Place the lawnmower on flat grass surface.
2.Keep safety interlock I pressed down and pull starting lever J on the upper handle 0.
The lawnmower starts.
3.Release safety interlock I.
4.Only push the mower forwards and at walking pace.
When in operation, the extension cable G must always be guided in the direction you are working and to the side of the area to be worked on. Always work away from the connection cable.
14
