Gardena 42 A Li Troubleshooting, Problem, Possible cause, Remedy, while working, Abnormal noise

GB

3. Using a soft brush, remove grass clippings from the vision window 56.

56

4. Wipe over the surface of your lawnmower with a dry cloth.

IMPORTANT:- Never use water for cleaning your lawnmower. Do not clean with chemicals, including petrol, or solvents - some can destroy critical plastic parts.

9. Troubleshooting

Important:

Unplug the safety key and remove battery.

IMPORTANT:- Beware of sharp blade ! Wear Gloves

Problem	Possible cause	Remedy
Motor will not start / motor stops	Safety key is not inserted	Insert safety key (see 5. Initial
while working		Operation)
	Battery is not inserted	Insert Battery (see 5. Initial
		Operation).
	Red LED light flashing	Charge Battery (see 5. Initial
	Battery is not charged	Operation).
	Green LED and Error LED	Put product out of the sun,
	both lights flashing	Wait 15 minutes for product
	Motor temperature is high	to cool down and re-start.
	Yellow LED and Error LED	Put product out of the sun,
	both lights flashing.	Wait 15 minutes for product
	Battery temperature is high	to cool down and re-start.
	Red LED and Error LED	Put product out of the sun,
	both lights flashing	Wait 15 minutes for product
	Controller temperature is high	to cool down and re-start.
	Error LED light flashing	Clear obstruction and re-start.
	Overcurrent/motor is blocked
	Error LED light on continuously	Product to be checked by
	Controller failure	GARDENA Service.
Abnormal noise	Screws/components loose	Tighten screws or product to be
Excessive Vibration		checked by GARDENA Service.
	Blade fitted incorrectly	Product to be checked by
		GARDENA service.
	Foreign bodies on the blade	Remove foreign bodies.
	Blade very dirty	Clean blade.
	Blade damaged	Product to be checked by
		GARDENA Service.
Poor grass collection	Cutting height too low	Raise cutting height
		(see 6. Operation - Cutting
		height adjustment).
	Grassbox is full	Empty grassbox
		(see 6. Operation -
		Grassbox full window).
	Grass discharge chute is blocked/	Remove grass
	grass has collected under deck	(see 8. Maintenance - Cleaning).
Lawn cuts unevenly	Blade is blunt	Product to be checked by
		GARDENA Service.
	Grass is too long	Raise cutting height
		(see 6. Operation - Cutting
		height adjustment)
Lawnmower becomes	Grass is too long	Raise cutting height
heavy to push		(see 6. Operation - Cutting
		height adjustment)

20