Fitting fully assembled grassbox to lawnmower
28 |
GB |
30 |
29 |
1.Lift safety flap 28.
2.Make sure the discharge chute is clean and free from debris 29.
3.Locate fully assembled grassbox onto 2 location points 30 at the rear of the deck.
4.Locate safety flap onto the top of the grassbox. Ensure the grassbox is securely located.
IMPORTANT !
AFTER FITTING ENSURE NO GAP REMAINS BETWEEN THE SAFETY FLAP AND THE GRASSBOX.
•Removal is the reverse procedure.
For larger areas of grass where grass collection is not required you can use your lawnmower without the grassbox. Ensure the Safety Flap is fully closed. The design of the safety flap permits the cut grass to be discharged downward behind the machine.
4. Function
31 |
32 |
Your product can be used to cut grass using the following methods:-
Grassbox Fitted 31 :- grass is collected effectively and compacted into the grassbox.
Mulch Plug Fitted 32 :- grass cuttings are finely chopped to return nutrients to your lawn.
Rear Discharge 33 :- Effectively cuts long grass with no need to empty the grassbox.
The mowing time depends on the height and moisture of the grass and the charge of the battery.
➔Mow twice a week during the growing
season, your lawn will suffer if more |
|
than a third of its length is cut at one |
|
time. | 33 |
Do Not Overload Your Mower
Mowing long thick grass may cause the motor speed to drop, you will hear a change in the motor sound. If the motor speed drops you may overload your lawnmower which may cause damage. When mowing in long thick grass a first cut with the cutting height set higher will help reduce the load. See Cutting Height Adjustment.
5. Initial Operation
Charging the battery | Before using for the first time, the battery must be fully charged. |
| The |
| and the charging process can be interrupted at any time without |
| harming the battery (no memory effect). |
WARNING !
Overvoltage damages batteries and the battery charger.
➔Ensure the correct mains voltage.
16
