Gardena 6000S, 6000 SP manual Storage, Cleaning, Troubleshooting, Disposal, Flushing the pump

GB

5. Storage

Storage:	➜ Clean and store the pump in a frost-free place before the first
	frost arrives.
Disposal:	The product must not be added to normal household waste.
(in accordance with	It must be disposed of in line with local environmental regulations.
RL2002/96/EC)

6. Cleaning

Flushing the pump:

Cleaning the suction base and feed impeller:

￿

￿

￿

￿s

￿

￿

The GARDENA should not require regular maintenance.

After pumping pumped chlorinated swimming pool water or other liquids leaving residues, the pump should be rinsed with clear water.

WARNING ! Electric shock !

Risk of injury due to electric shock.

➜Disconnect the pump from the mains before cleaning the suction base and feed impeller.

1.Unscrew the cross-head screws ￿ and remove the suction base ￿ from the pump.

2.6000 SP: Press snap hooks ￿s together and remove safety cover ￿ from suction foot ￿ and clean.

3.Clean suction foot ￿ and impeller ￿.

4.Refit suction foot ￿ and screw in the cross-head screws ￿ again. During this, ensure that the sealing ring ￿ is seated correctly.

5.6000 SP: Reinsert the safety cover ￿ in the suction foot ￿ again.

For safety reasons a damaged feed impeller ￿ can only be exchanged by the GARDENA Service Centre.

7. Troubleshooting

WARNING ! Electric shock !

Risk of injury due to electric shock.

➜Disconnect the pump from the mains before rectifying faults.

Problem	Probable cause	Remedy
Pump is running,	Air cannot escape as	➜ Open pressure line
but oes not deliver.	pressure line is closed.	(e.g. kinked pressure pipe).
	Air locks in the suction base.	➜ Wait for max. 60 seconds
		until the pump deaerates
		automatically over the vent
		valve. If necessary, switch
		off and start it again.

14