G
GARDENA Petrol-driven Motor Pump 7000/3 2 T
1. Information concerning the Operating Instructions
Please read these operating instructions carefully. Follow the information given. Use the oper- ating instructions to get acquaint- ed with the proper use of your
For safety reasons, peo- Aple who are not familiar with these operating instruc- tions should not use this
Keep these operating instruc- tions in a safe place.
Following the operating instruc- tions supplied by the manufac- turer is a prerequisite for the proper use of the pump.
2. Proper Use
GARDENA
Besides, the GARDENA Petrol- driven Motor Pump can be used
for draining swimming pools, distribution of
The GARDENA Petrol- Adriven Motor Pump is not designed for continuous operation (e.g. industrial appli-
cation, continuous circulating operation).
Corrosive, easily com- Abustible, aggressive or explosive substances (e.g. petrol, petroleum or nitro thin- ner, salt water as well as food) must not be pumped.
The temperature of the liquid must not exceed 40 °C.
3. Functional Parts (ill. B / C)
1 Carrying frame | 5 Feed opening with seal | D |
2 Outlet, delivery side | 6 Outlet with seal | E |
(female thread G1) | 7 Seal | F |
3 Inlet, suction side | 8 Hydraulics housing lid | G |
(female thread G1) | 9 8 Allen screws |
|
with backflow preventer | 0 Fuel filler cap | H |
4 2 universal pump adaptors | A Petrol cock | I |
33.3 mm (G 1) | B Petrol hose | J |
| C Carburettor |
|
Throttle lever
Choke lever
Starter handle
Stop button
(EMERGENCY STOP) Spark plug connector Clamp for air filter
Air filter lid
4. Measures before Operation
4.1Positioning and Filling the Pump
.Locate pump at safe A distance from the liquid.
.Fill the pump with at least
0.8l of the liquid to be pumped via the feed opening 5 or the delivery side 2 every time before you turn on the pump.
4.2 Hose Connection
Suction side 3
.Screw one of the pump adap- tors provided 4
.At the suction inlet, a vacuum- resistant suction hose has
to be screwed tight onto the pump, e.g. GARDENA Suction Hose, art.no. 1412. The built- in backflow preventer at the suction inlet 3 prevents dry-
running of the suction hose when the operation is stopped. In addition it provides reduced suction time when starting the pump again.
.For the suction inlet A don’t use any fittings of
the hose connection system!
Delivery side 2
.Screw the second pump adap- tor
9