Gardena 7940, 7941

Attach the filter trough:

Attach the motive water

hose

(only for set 7940):

4. Assembly

1. Pull the side clips aslightly away from

the filter trough 1and remove the

splashguard 2.

2. Insert the filter sieves 3into the filter

trough 1with the ridges facing b

downwards.

3. Install the collecting basket 4in the

filter trough 1.

4. Push the red adjuster cin the direc-

tion of the arrow and push the feet 5

(with the side notches facing outwards)

into the filter trough 1from below.

5. Push the sealing ring 6onto the nozzle

housing 7.

6. Push the nozzle housing 7into the filter

trough 1from the front.

7. Screw the threaded ring 8onto the

nozzle housing 7from

the inside.

8. Screw the small threaded connector 9

onto the nozzle housing 7.

9. Push the splashguard 2onto the

feet 5from above until the clips a

lock into place.

1. Push the union nut 0over the motive water hose A.

2. Push the motive water hose Aall the way into the universal

adaptor B.

3. Screw the union nut 0onto the universal adaptor Band

tighten by hand.

4. Repeat for the other end of the hose.

BB 00 AA

123