GB

Programme contour points of irrigation sector:

A

B

0

2 4 3

1 6 5

direction matches the required irrigation limits. If watering in a complete circle, the two sector stops zL and zR must be completely pushed together between P1 and P10.

Anti-vandal device:

If the nozzle head is violently turned over the sector-stops then the vandalism protection is triggered. As soon as the water supply is open, the sprinkler moves in one direction until the set sector has been achieved again.

The watering sector has to be selected before programming. Up to 50 contour points can be programmed with the large- area pop-up irrigation. The more points that are programmed, the more precisely the contour will be described (e.g. with a circular arc P7 – P10).

1.Open the two locks A and raise the cover B.

2.Open water supply.

When using for the first time, the minimum range (2.5 m with a flow pressure of 2 bar at the sprinkler) is selected.

3.Press OK button 4. The green Auto LED 6 lights up.

4.Press Menu button 1. The red Set LED 5 lights up.

5.Turn the nozzle head 0 on the orange ring by hand to the left-hand sector limit (in the example P1) and hold.

6.Use the two buttons “+” button 2 and “-”button 3 to set the range so that it reaches P1.

7.Press OK button 4.

The green Auto LED 6 lights up for 1 second and the first point P1 has been stored.

8.Turn the nozzle head 0 on the orange ring by hand to the next irrigation point (e.g. P2) and hold.

9.Use the two buttons “+” button 2 and “-”button 3 to set the range so that it reaches P2 for example.

10.Press OK button 4.

The green Auto LED 6 lights up for 1 second and the point has been stored.

11.Repeat the process from step 8 to 10 until the right-hand sector limit is reached (in the example P10).

12.Press Menu button 1.

The red Set LED 5 goes out, programming is complete, and the green Auto LED 6 lights up for 1 minute. The red Set LED then flashes every 8 seconds.

13.Release nozzle head 0 and check contour area watered.

14.If the contour is watered correctly, close the water supply.

15.Close cover B and both locks A.

Information about programming:

As soon as the first point is programmed, any existing programme will be deleted. After programming has been completed, no further points can be deleted or added later on. If the contour has not been set as required, reprogramming with more points will have to be carried out. If no button is pressed for 60 seconds during programming, programming will be automatically ended and the contour stored.

14

Page 4 Page 6
Page 5
Image 5
Gardena Art. 1559 manual Anti-vandal device, Information about programming
Page 4 Page 6

Art. 1559 specifications

The Gardena Art. 1559 is a versatile and essential gardening tool designed to enhance the experience of both amateur and professional gardeners. This product, known for its efficiency and reliability, has gained a significant following due to its innovative features and user-friendly design.

One of the standout characteristics of the Gardena Art. 1559 is its ergonomic construction. The tool boasts a comfortable grip that minimizes strain during prolonged use. This is particularly beneficial for gardeners who spend long hours tending to their plants. The handle is designed to provide maximum control, allowing for precise movement when trimming, shaping, or pruning plants.

In addition to its ergonomic design, the Gardena Art. 1559 incorporates advanced technologies that facilitate gardening tasks. One of these technologies is the integrated blade system, which ensures sharpness and durability. The blades are made from high-quality stainless steel, preventing rust while offering a clean cut to your plants. This feature not only helps in maintaining the health of your plants but also ensures a neat appearance in your garden.

Another notable technology integrated into the Gardena Art. 1559 is its adjustable length. This feature allows users to extend the tool to reach high branches or areas that are otherwise difficult to access without the need for a ladder. This adjustability enhances safety and efficiency, making it easier to accomplish various gardening tasks without additional assistance.

The Gardena Art. 1559 is also lightweight and easy to maneuver, making it suitable for users of all ages. Its compact design means that it can be stored easily in a shed or garage without taking up much space. Furthermore, the tool is easy to maintain, requiring minimal effort to keep it in top condition.

Overall, the Gardena Art. 1559 is a prime example of how thoughtful design and advanced technology come together to create a gardening tool that simplifies the tasks of pruning and trimming. Its ergonomic features, durable materials, and user-friendly functionalities make it an indispensable addition to any gardener's toolkit. Whether you are nurturing a small flower garden or managing a larger landscape, the Gardena Art. 1559 is equipped to help you achieve your gardening goals effectively.
Top Page Image Contents