Pump Valves and Fittings

The 2.1 L pump can be connected to the hydraulic system using one of two methods. The five-connector method (page 8) uses the C1 and

C2 fittings to connect the pump to the cylinder and the H1 and H2 fittings to connect the pump to the helm. The three-connector method

(pages 5–7) uses only the H1 and H2 fittings, with a t-connector splitting the connection between the helm and cylinder. The return line fitting is used in both cases to connect to only the helm. The check valves do not need to be reconfigured if the boat is equipped with a balanced cylinder. If the boat is equipped with an unbalanced cylinder, the check valves must be reconfigured (page 3). The bypass valve is only opened for hydraulic bleeding, and must be fully tightened during normal operation.

4

2.1 L Hydraulic Pump Installation Instructions