Connecting the Collar to a Computer

NOTICE

To prevent corrosion, thoroughly dry the contacts on the collar and the surrounding area before connecting the charging clip.

You can connect the collar to your computer to use with programs like BaseCamp. The collar is not a mass storage device.

1Connect the USB cable to a USB port on your computer.

2 Snap the charging clip onto the collar.

3 Plug the small end of the USB cable into the mini-USB port.

Remove the charging clip from the collar when you are done. If you do not remove the clip, it may become detached from the collar and become lost.

Transferring Dog Tracks to BaseCamp

You can transfer the dog tracks to BaseCamp.

1Connect the collar to the computer (page 17).

2 Turn on the collar (page 2). 3 Open BaseCamp.

BaseCamp recognizes and transfers the collar's internal track log automatically.

Deleting Files

NOTICE

If you do not know the purpose of a file, do not delete it. Your device memory contains important system files that should not be deleted.

1Open the Garmin drive or volume.

2If necessary, open a folder or volume.

3 Select a file.

4 Press the Delete key on your keyboard.

Disconnecting the USB Cable

If your device is connected to your computer as a removable drive or volume, you must safely disconnect your device from your computer to avoid data loss. If your device is connected to your Windows computer as a portable device, it is not necessary to safely disconnect.

1Complete an action:

•For Windows computers, select the Safely Remove Hardware icon in the system tray, and select your device.

•For Mac computers, drag the volume icon to the trash.

2Disconnect the cable from your computer.

tempe™

The tempe is an ANT+ wireless temperature sensor. You can attach the sensor to a secure strap or loop where it is exposed to ambient air, and therefore, provides a consistent source of accurate temperature data. You must pair the tempe with your device to display temperature data from the tempe.

Using Optional Fitness Accessories

1Bring the device within range (3 m) of the ANT+ accessory.

2 Select > Setup > Fitness.

3 Select Heart Rate Monitor or Bike Cadence Sensor. 4 Select Search for New.

5Customize the data fields to view the heart rate or cadence data (page 13).

Tips for Pairing ANT+ Accessories with Your Garmin Device

•Verify that the ANT+ accessory is compatible with your Garmin device.

•Before you pair the ANT+ accessory with your Garmin device, move 10 m (32.9 ft.) away from other ANT+ accessories.

•Bring the Garmin device within range 3 m (10 ft.) of the ANT+ accessory.

•After you pair the first time, your Garmin device automatically recognizes the ANT+ accessory each time it is activated. This process occurs automatically when you turn on the Garmin device and only takes a few seconds when the accessories are activated and functioning correctly.

•When paired, your Garmin device receives data from only your accessory, and you can go near other accessories.

Using Optional Fitness Accessories

1Bring the device within range (3 m) of the ANT+ accessory.

2 Select > Setup > Fitness.

3 Select Heart Rate Monitor or Bike Cadence Sensor. 4 Select Search for New.

5Customize the data fields to view the heart rate or cadence data (page 13).

TT10 Battery Replacement Instructions
TT 10 Components

Appendix

Accessories and Replacement Parts

Purchasing Accessories

Go to http://buy.garmin.com.

Optional Maps

You can use additional maps with the device, such as BirdsEye satellite imagery, BlueChart® g2, and City Navigator® detailed maps. Detailed maps may contain additional points of interest, such as restaurants or marine services. For more information, go to http://buy.garmin.com or contact your Garmin dealer.

ANT+ Sensors

Your device can be used with wireless ANT+ sensors. For more information about compatibility and purchasing optional sensors, go to http://buy.garmin.com.

Back plate

À

Power key

Á

Battery cover

Â

Connectors

Ã

Battery

Ä

Appendix

17