Marine Alarm Setup: Sets alarms for when you exceed a specified drift distance while anchored, when you are off course by a specified distance, and when you enter water of a specific depth.
Device Information
Viewing Device Information
You can view the unit ID, software version, and license agreement.
Select Setup > About.
Updating the Software
Before you can update the handheld device or collar software, you must connect the handheld device (page 16) or the collar (page 17) to the computer.
You must update the software on the handheld device and collar separately.
NOTE: Updating the software does not erase any of your data or settings.
1Go to www.garmin.com/products/webupdater.
2 Follow the
Device Care
NOTICE
Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause permanent damage.
Never use a hard or sharp object to operate the touch screen, or damage may result.
Avoid chemical cleaners and solvents that can damage plastic components.
Secure the weather cap tightly to prevent damage to the mini- USB port.
Cleaning the Device
1Wipe the device using a cloth dampened with a mild detergent solution.
2Wipe it dry.
Cleaning the Touchscreen
1Use a soft, clean,
2If necessary, lightly dampen the cloth with water.
3If using a dampened cloth, turn off the device and disconnect the device from power.
4Gently wipe the screen with the cloth.
Specifications
Alpha 100 Handheld Device Specifications
Battery type | Rechargeable, replaceable |
Battery life | Up to 20 hours |
|
|
Operating temperature range | From |
Charging temperature range | From 32°F to 113°F (from 0°C to 45°C) |
|
|
From 32°F to 77°F (from 0°C to 25°C) | |
temperature range |
|
Water resistance | IEC 60529 IPX7 |
VHF wireless range | Up to 9 miles |
|
|
ANT+ Low power wireless | About 10 ft. (3 m) |
range |
|
TT 10 Dog Collar Device Specifications
Battery type | Rechargeable, replaceable |
Battery life | 20 hours with a |
| hours with a |
Operating temperature | From |
range |
|
Charging temperature | From 32°F to 113°F (from 0°C to 45°C) |
range |
|
From | |
temperature range |
|
From | |
temperature range |
|
Water resistance | Up to 10 meters |
Battery Information
WARNING
This product contains a
Do not use a sharp object to remove batteries.
CAUTION
Contact your local waste disposal department to properly recycle the batteries.
Long-Term Storage
NOTICE
The normal
When you do not plan to use the handheld device for several months, the battery should be removed. Stored data is not lost when the battery is removed.
When you do not plan to use the collar for several months, the battery should be charged to about 50%. The device should be stored in a cool, dry place with temperatures are around the typical household level. After storage, the collar should be fully recharged before use.
Maximizing the Battery Life
You can do several things to extend the life of the batteries in the handheld device and collar.
•Reduce the backlight brightness (page 15).
•Reduce the backlight timeout (page 16).
•Select a longer duration for your handheld update rate (page 16).
•Turn off the transmitter (page 16).
•Use battery save mode (page 16)
•Decrease the map drawing speed (page 16).
•Put the dog collar device into rescue mode (page 9) to conserve the collar battery.
•Extend the duration for the collar update rate (page 16) to conserve the collar battery.
Adjusting the Backlight Brightness
Extensive use of screen backlighting can significantly reduce battery life. You can adjust the backlight brightness to maximize the battery life.
NOTE: The backlight brightness may be limited when the battery is low.
1Select the Power key.
Device Information | 15 |