Installing Your Fishfinder

•DO NOT mount the transducer in the path of the prop on single-drive boats. The transducer can cause cavitation that can degrade the boat’s performance and damage the prop. On twin-drive boats, mount the transducer between the drives, if possible.

8

Do not mount the transducer behind strakes, rivet lines, struts, fittings, water intakes or discharge ports.

Mount the transducer parallel with the water line.

Make sure the transducer is below water level when the boat is on plane at high speed.

Apply marine sealant to all screw threads to prevent

water from seeping into the transom.

Fishfinder 90/140 Owner’s Manual

190-00582-10_0A.indd 8

 

 

12/2/2011 3:08:58 PM