From the Home screen, select Information > Dashboard > Engine.

Cycling Through Engine Gauge Screens

1.From the Home screen, select Information > Dashboard > Engine.

2.Select the left and right arrows on the Rocker to move from one gauge screen to the next.

Customizing Engine Gauge Limits

To establish the upper and lower limits of a gauge and the range of desired standard operation, you can configure up to four values for the engine gauge. When a value exceeds the range of standard operation, the gauge face or bar becomes red.

Setting

Description

Scale

This value is less than the rated minimum, and it represents

minimum

the lower limit of the gauge. This setting is not available on all

 

gauges.

Scale

This value is greater than the rated maximum, and it represents

maximum

the upper limit of the gauge. This setting is not available on all

 

gauges.

Rated

Represents the minimum value of the standard operating range.

minimum

 

Rated

Represents the maximum value of the standard operating

maximum

range.

1.From the Home screen, select Information > Dashboard > Engine > MENU > Gauge Setup > Set Gauge Limits.

Viewing Information

2.Select a gauge.

3.Select Gauge Limits > Custom.

4.Select the gauge limit you want to set (Scale Min, Scale Max, Rated Min, or Rated Max).

NOTE: Some of these options may not be available for all gauges.

5.Select the gauge limit.

6.Repeat steps 4 and 5 to set additional gauge limits.

Activating Status Alarms for Engine Gauges

If you have activated gauge status alarms, when the engine sends a warning status message over the NMEA 2000 network, a gauge status alarm message appears. The gauge face or bar may become red depending on the alarm type.

From the Home screen, select Information > Dashboard > Engine > MENU > Gauge Setup > Status Alarms > On.

Customizing Engine Gauge Status Alarms

1.From the Home screen, select Information > Dashboard > Engine > MENU > Gauge Setup > Status Alarms > Custom.

2.Select one or more engine gauge alarms that you want to turn on or off.

3.Select Back.

GPSMAP 400/500 Series Owner’s Manual