2.Select a setting (Sounder, Route, System, or Garmin).

3.Select the NMEA 0183 output sentence to toggle the output on or off.

•Posn. Precision—adjust the number of digits (Two Digits, Three Digits, or Four Digits) to the right of the decimal point for transmission of NMEA output.

•Waypoint IDs—determine how the unit identifies waypoint identifiers (Names or Numbers).

•Defaults—resets all NMEA 0183 sentences to the default setting. NMEA 2000 Setup—

•Device List—lists the NMEA 2000 devices on your network. If a

NMEA 2000 device has configuration options or settings, select the device for a list of options.

•Label Devices—allows you to name your engines and tanks so that you can better identify their location on the boat.

To label engines as numbers:

From the Home screen, select Configure > Communications > NMEA 2000 Setup > Label Devices > Change Engine Labels

>Use Numbers.

Configuring the Chartplotter

To label engines as names:

1.From the Home screen, select Configure > Communications > NMEA 2000 Setup > Label Devices > Change Engine Labels > Label Type > Choose Names.

2.Select the engine you want to name.

3.Select the location of the engine: Port (P), Center (C), Starboard (S), Fore (F), or Aft (A).

4.Select the label you want to use for the engine.

To label tanks as numbers:

1.From the Home screen, select Configure > Communications > NMEA 2000 Setup > Label Devices > Change Tank Labels.

2.Select the type of tank you want to label.

3.Select Use Numbers.To label tanks as names:

1.From the Home screen, select Configure > Communications > NMEA 2000 Setup > Label Devices > Change Tank Labels.

2.Select the type of tank you want to label.

3.Select Choose Names.

4.Select a tank.

3.Select the location of the tank: Port (P), Center (C), Starboard

(S), Fore (F), or Aft (A).

4.Select the label you want to use for the tank.

GPSMAP 400/500 Series Owner’s Manual

51