note: Your device may include either a hard strap monitor or a soft strap monitor.
The heart rate monitor is on standby and ready to send data. Wear the heart rate monitor directly on your skin, just below your breastplate.
It should be snug enough to stay in place during your run.
1.Connect one side of the strap to the heart rate monitor module.
2.Wet both electrodes on the back of the heart rate monitor strap to create a strong connection between your chest and the transmitter.
Electrodes
Electrodes
3.Wrap the strap around your chest, and connect the other side.
note: The Garmin logo should be right-side up.
4.Bring the FR70 within range (3 m) of the accessory. Press MODE until the training page appears.
TIP: If the heart rate data is erratic or does not appear, you may have to tighten the strap on your chest or warm up for
Using the Foot Pod (Optional) The foot pod is on standby and ready to send data as soon as you install it or move it.
Installing on Shoe Laces
1.Press the tab on the lace clip. Lift and separate the foot pod from the lace clip.
2.Loosen your shoe laces.
FR70 Quick Start Manual | 7 |