Charging the Collar
NOTICE
To prevent corrosion, thoroughly dry the contacts on the collar and the surrounding area before connecting the charging clip.
You should fully charge the battery before you use the device for the first time or whenever the battery is low (Checking the Battery Level). It is normal for the battery to discharge in approximately 7 to 10 weeks when the device is not in use. Charging a fully depleted battery takes about 2 hours.
NOTE: The device will not charge when outside the temperature range of 32° to 104°F (0° to 40°C).
1 Snap the charging clip onto the device .
ÀÁ
2Plug the power cable into a power source.
The status LED is solid red when the collar is charging.
3After the status LED turns solid green, remove the charging clip from the collar.
Turning On the Dog Collar Device
•On the dog collar device, hold the power key until the status LED turns green and the collar beeps to turn it on in training mode.
•On the dog collar device, hold the power key until the status LED turns blue to turn on the BarkLimiter™ feature (BarkLimiter).
•On the dog collar device, hold the power key until the status LED turns yellow to enter pairing mode (Pairing a Dog Collar Device with the Handheld Device).
Turning Off the Device
1On the dog collar device, hold the power key until the red LED appears.
2Release the power key.
The dog collar device beeps to confirm powering off.
NOTE: If the device is powered off in BarkLimiter mode, the LED flashes the number of corrected barks before powering off (Checking the Bark Odometer).
Dog Collar Device
You can use up to 9 dog collar devices with a single handheld device.
Each dog collar device must be paired with the handheld device before it can be used. During the pairing process, each dog collar device is associated with a different color on the handheld device.
Pairing a Dog Collar Device with the Handheld Device
NOTE: If your handheld device and dog collar device were included in the same package, the devices are paired from the factory.
1On the handheld device, move the toggle switch and select a key to choose the color associated with the dog collar device.
2On the handheld device, set the intensity level to a numbered position (Changing the Intensity Level).
3On the dog collar device, hold the power key for about 5 seconds until the status LED changes to yellow.
4On the handheld device, select a training key.
The dog collar device beeps when the devices have paired successfully. If the device does not beep, pairing has not been successful.
TIP: If the devices did not pair successfully, you should verify the batteries in both devices are fully charged and the intensity level is set to a numbered position.
Selecting a Dog Collar Device
Before you can select and control a dog collar device, you must pair the dog collar device with the handheld device (Pairing a Dog Collar Device with the Handheld Device).
Select the color associated with a dog collar device:
•To select the button color, move the dog collar device toggle switch up.
•To select the inner ring color, move the toggle switch to the middle position.
•To select the outer ring color, move the toggle switch down.
The training keys control the dog collar device associated with the selected color.
Dog Training
You should research and investigate the training methods best suited for you, your dog, and your needs.
When used properly, the Pro Trashbreaker training system is an effective training tool to aid your dog in reaching its full potential. The use of the training system should be part of an overall training program.
Fitting the Collar on Your Dog
CAUTION
To prevent irritation from the contact points, remove the collar for at least eight hours out of every
This device is not intended for human use. Do not attempt to use on any person.
In order to properly correct the dog, the collar and device must fit the dog properly. If the collar is too loose or positioned incorrectly, corrections may be inconsistent. This can delay or prevent successful training.
1Place the collar around the middle of the dog's neck.
2Position the device at the front of the dog's neck, with the status LED facing toward the dog's chin and the contact points against the throat.
3Tighten the strap so that it is very snug around the dog's neck, and fasten the buckle.
NOTE: The collar should fit tightly and should not be able to rotate or slide on the dog's neck. The dog must be able to swallow food and water normally. You should observe your dog's behavior to verify the collar is not too tight.
2 | Dog Training |