note: To connect the Edge to your computer using the USB cable, see page 8.
1.Plug the AC charger into a standard wall outlet.
2.Pull up the weather cap from the
➊
3.Plug the small end of the AC charger into the
4.Charge the Edge for at least three hours before you begin using it.
A fully charged battery can run for up to 14 hours before it must be recharged.
Installing the Edge
For the best GPS reception, position the bike mount so the front of the Edge is oriented toward the sky. You can install the bike mount on the stem or the handlebars.
1.Select a suitable and secure location to mount the Edge where it does not interfere with safe operation of your bike.
2.Place the rubber disk ➊ on the back of the bike mount ➋.
The rubber tabs align with the back of the bike mount so it stays in place.
➍
➋
➊
➌
Edge 200 Owner’s Manual | 3 |