Garmin 200 Acquiring Satellite, Signals, Going for a Ride, Training Indoors, Saving Your Ride Data

Acquiring Satellite

Signals

It may take 30 to 60 seconds to acquire signals.

1.Go outdoors to an open area.

2.Make sure that the front of the Edge is oriented toward the sky.

3.Wait while the Edge searches for satellites.

The time of day and date are set automatically.

Going for a Ride

Before you can record history, you must acquire satellite signals (page 6).

1.Select Ride.

2.Select Start to start the timer.

History is only recorded while the timer is running.

3.After completing your ride, select

.

Training Indoors

You can turn off GPS when you are training indoors.

1.Select Ride > Start.

A message appears asking if you want to use the device indoors.

2.Select Yes.

GPS automatically turns back on when indoor training is complete.

Saving Your Ride Data

Select Save to save your ride data and reset the timer.

6 Edge 200 Owner’s Manual