Installing the Fishfinder 400C

Step 5: Test the Installation

To turn on your Fishfinder 400C for the first time, press and hold thePOWER key until the unit beeps and turns on. Use the ROCKER and the SELECT key and follow the screens to configure your Fishfinder 400C.

Note: Although it is possible to perform some checks with the boat trailered, the boat should be in the water to properly test the installation.

To configure your Fishfinder 400C for the first time:

Select a language.

 

Select a transducer

Select units of

Select a color

 

 

type.

measure.

scheme.

 

 

 

 

 

The Home screen appears after you select your configuration options. After 15 seconds of inactivity, the fishfinder automatically switches to Full Screen.

Note: If the transducer is not detected, a “Transducer Disconnected, Sonar Turned Off” message appears.

Fishfinder 400C Owner’s Manual