Installing the Fishfinder 400C

Step 2: Mount the Fishfinder

You can mount your fishfinder in one of two ways:

•Surface Mount—mount the fishfinder onto a bracket

(included) that attaches to the console or overhead.

•Flush Mount—use the optional flush mount kit to mount the fishfinder into a flat panel. See the “Appendix” for more information.

Surface Mounting the Fishfinder

The Fishfinder 400C’s compact, waterproof case is suitable for mounting in exposed locations or at the nav station. The Fishfinder 400C comes with a tilt/swivel mounting bracket that can be used for console or overhead mounting.

Mounting the Bracket Assembly

Tools (not included)—drill, screwdriver (Phillips or standard), and one of the following:

•Three #8 (4 mm) pan-head machine bolts with matching nuts and washers and a 5/32" (5 mm) drill bit.

•Three #8 pan-head self-tapping screws and a 1/16" drill bit for drilling starter holes.

Use a pan-head machine bolt or self-tapping screw to secure the swivel base. If you use a screw with a countersunk head, you risk damaging the mounting bracket.

OK



Fishfinder 400C Owner’s Manual