Viewing Information
Viewing Information
•Select Add New File to create a new file. Enter the file name using the ROCKER (GPSMAP 4000 series) or onscreen keyboard (GPSMAP 5000 series) and select Done.
4.Select Save To Card. The file name is saved with an .ADM extension.
5.Remove the SD card from the unit and insert it into an SD card reader attached to a computer.
6.From Windows® Explorer, open the Garmin\UserData folder on the SD card.
7.Copy the appropriate .ADM file on the card and paste it to any location on the computer.
To restore backup data to your chartplotter:
1.Copy the appropriate .ADM file from the computer to an SD card in the Garmin\UserData folder.
2.Insert the SD card into your chartplotter.
3.From the Home screen on your chartplotter, select Information > User Data > Data Transfer > Card > Replace From Card.
To delete all waypoints, routes, and tracks:
1.From the Home screen on your chartplotter, select Information > User Data > Clear User Data.
2.Select Waypoints, Routes, Saved Tracks, or All.
3.Select OK or Cancel.
Viewing the DSC List
The DSC List is a log of the
>DSC List.
Note: Your unit must be connected to a VHF radio that supports DSC (Digital Selective Calling) in order to view the DSC List.
Viewing Engine Gauges
For more than two engines, you can only use the digital gauges. For one or two engines, you can switch between analog and digital gauges.
Note: You must be connected to a NMEA 2000 network capable of sensing engine data in order to view the gauges. See the GPSMAP 4000/5000 Series Installation Instructions for details.
To select analog or digital gauges:
1.To view analog or digital engine gauges from the Home screen, select Information > Dashboard Gauges > Engine > Menu.
2.Select Analog or Digital.
30 | GPSMAP® 4000/5000 Series Owner’s Manual |