Appendix

Appendix

MARPA: Target Lost—(radar) unable to track a MARPA

Sonar Failed, Unit Needs Repair—there has been a sonar

target any longer.

failure and the unit needs to be sent in for repair. Contact

NMEA Depth Is Below Transducer—(sonar) the NMEA

Garmin Product Support.

depth input is using the DBT sentence which does not

Sonar Service Incompatible. Software Update

include keel offset.

Required—a software update is needed. Contact Garmin

No DGPS Position—the unit lost differential GPS

Product Support for assistance updating your network.

reception (WAAS). Make sure you have a clear view of

Sonar Service Lost—(sonar) the unit has lost

the sky.

communications with the remote sonar unit. Check the

No Proximity Waypoints Found—no proximity

network and the sonar wiring.

waypoints found while attempting a user data transfer.

Tide Alarm—the tide has reached the user-specified tide

No Routes Found—no routes found while attempting a

alarm range.

user data transfer.

Track Already Exists—the named track already exists.

No Tracks Found—no tracks found while attempting a

Select another name.

user data transfer.

Track Log Full—there is no longer any space in the active

No User Waypoints Found—no user waypoints found

track log storage.

while attempting a user data transfer.

Track Truncated—some points on the end of the track

Not All Maps Fit, Some Maps Will Not Be Drawn—

have been discarded.

there are more maps present on the SD card than the unit

Transducer Disconnected, Sonar Turned Off—the

can support. Some maps on the card will not be drawn or

transducer has been disconnected. Sonar has been turned

used to find map features.

off. Check transducer wiring.

Off Course Alarm—the boat has left the user-defined

Transfer Complete—user data transfer is complete.

course.

Unknown bridge height within calculated auto-guidance

Proximity Alarm—the boat has come close to a user-

route—(BlueChart g2 Vision) there is an unknown bridge

defined proximity point.

height within the auto-guidance route.

Proximity Alarm Memory is Full—the proximity

User Card Not Found—user data card transfer. Make sure

waypoint memory is full. Erase existing proximity

an SD card is fully inserted.

waypoints to make room.

Water Speed Sensor not Working—the water speed

Proximity Overlaps Another Proximity Waypoint—a

sensor is not working properly. Check the wheel for

proximity point is overlapping another proximity waypoint.

obstructions and check wiring.

Radar Guard Zone Alarm—(radar) an object has been

Water Temperature Alarm—(temperature sensor/

detected in the user-defined radar guard zone.

transducer) the water temperature has entered or left the

Radar Needs Repair Error Code—(radar) the radar needs

user-defined water temperature alarm zone.

repair. An error code will be listed to help diagnose the

Warning: Auto-guidance route starting position moved

error.

due to safe depth settings—(BlueChart g2 Vision) auto-

Radar Service Incompatible. Software Update

guidance has calculated the route, but the starting point has

Required—a radar software update is needed. Contact

been moved to deeper water.

Garmin Product Support for assistance updating your

Warning: Auto-guidance route ending position moved

network.

due to safe depth settings—(BlueChart g2 Vision) auto-

Radar Service Lost—(radar) the unit has lost

guidance has calculated the route, but the end point has

communications with the remote radar unit. Check the

been moved to deeper water.

network and the radar wiring.

Waypoint Already Exists—the named waypoint already

Route Already Exists—the named route already exists.

exists. Select another name.

Select another name.

Waypoint Memory is Full, Can’t Create Waypoint—the

Route is Full—the individual route is full, no more

User Waypoint memory is full. Erase existing waypoints to

waypoints can be added.

make room.

 

Route Memory is Full, Can’t Create Route—the

 

chartplotter route memory is full, no more routes can be

 

created. Erase existing routes to make room.

 

Route Truncated—some points on the end of the route

 

have been discarded.

 

Shallow Water Alarm—(sonar) the boat has entered the

 

user-defined shallow-water depth.

 

Simulating Operation—the unit is in Simulator Mode.

 

56

GPSMAP® 4000/5000 Series Owner’s Manual