Connect your video or computer equipment to these ports:

Connect a computer to this port

D4 port (not used in the U.S.)

Connect video equipment to any of these ports

If you connect to the Input A port, be sure to select the correct Input Signal setting for your equipment, or the image may not display properly (see page 21).

Other Connections

■Power cable

Plug the power cable into the projector and a grounded electrical outlet. The P power light on the projector’s control panel turns orange when the projector is receiving power and is in standby mode.

■Control (RS-232C) and USB ports

Connect a computer to one of these ports to use the Cinema Color Editor software. See page 39 for details.

14