Inverting and Mirroring the Image

If the image is displayed upside-down or backward, change the Projection option:

1.Press the Menu button on the remote control.

2.Use the menu navigation buttons to open the Setting menu, then open the Screen menu and select

Projection.

3.Choose from these options:

■Front if the projector is located in front of the screen (for example, on a table).

■Front/Ceiling if the projector is located in front of the screen and mounted overhead.

Menu button

Menu navigation

buttons

■Rear if the projector is located behind the screen.

■Rear/Ceiling if the projector is located behind the screen and mounted overhead.

Positioning the Image

If the image is not centered on the screen, use the horizontal and vertical lens shift knobs to adjust its position.

Note: You can display a test pattern to make adjustment easier. Press the Pattern button on the remote control, then select Cross-hatching.

Vertical lens shift knob

Horizontal lens shift knob

Adjustable feet

If you still need to raise the height of the image after using the vertical lens shift knob, lift the front of the projector and rotate the adjustable feet until the image is positioned correctly. You can also use the feet to correct the angle of the image if it’s tilted.

22