2 Install the Software

Now that you’ve set up your printer, you’re ready to install the software from the CD-ROM attached to the front of this card.

The CD-ROM includes:

■The printer driver that lets you print; you must install this for the printer to work correctly

■Creative software, including the EPSON Guided Printing Exercise and Polaroid® PhotoMAX™ Family Pack

■Your electronic EPSON Stylus COLOR 440 Manual

Note:

If you don’t have a CD-ROM drive, you can download the drivers or order diskettes from EPSON. See “Ordering Printer Software Diskettes” in the Printer Basics book.

Keep this card with you as you install your printer software so you can refer to it when you need it.

Caution:

If you see a screen telling you that Windows has detected your printer and to install a driver, always select Cancel. You can’t install your software that way.

1.Make sure your printer is connected to the computer and that both are turned off.

2.Turn on your computer, but leave your printer turned off. Do not turn your printer back on until you have completed the software installation.

3.After you see the Windows desktop icons, insert the EPSON Stylus COLOR 440 CD-ROM. The CD-ROM starts automatically.

Note:

If it doesn’t start automatically, double- click the My Computer icon, then double-click theEpson (E:) icon (for your CD-ROM drive). Double-click the Epson.exe icon to start the installer.

4.You see the EPSON screen and then the Software License Agreement screen. Read the agreement and then click Agree to continue.

5.Follow the on-screen instructions to install your software. The printer software installation is in two parts. First the printer driver is installed.

Click OK when you see this screen:

Then you’ll be prompted to install Status Monitor 2. Click Next to install it when you see this screen: