Garmin Edge 500 Acquiring Satellite, Signals, Putting on the Heart Rate Monitor

Acquiring Satellite

Signals

It may take 30 to 60 seconds to acquire signals.

1.Go outdoors to an open area.

2.Make sure that the front of the Edge is oriented toward the sky.

3.Wait while the Edge searches for satellites.

Do not begin moving until the locating satellite page disappears.

Putting on the Heart Rate Monitor

note: If you do not have a heart rate monitor, you can skip this step.

Wear the heart rate monitor directly on your skin, just below your breastplate. It should be snug enough to stay in place during your ride.

1.Push one tab on the strap through the slot in the heart rate monitor.

Tab

Heart Rate Monitor Strap

Slot

Heart Rate Monitor (Front)

Electrodes

Heart Rate Monitor (Back)

2. Press the tab down.

6 Edge 500 Quick Start Manual