3.Wet both electrodes on the back of the heart rate monitor to create a strong connection between your chest and the transmitter.

4.Wrap the strap around your chest and attach it to the other side of the heart rate monitor.

The Garmin logo should be right‑side up.

After you put on the heart rate monitor, it is on standby and ready to send data. When the heart rate monitor is paired, a message appears, and the heart rate icon appears on the main menu.

Note: For more heart rate monitor information, see the Edge 500 Owner’s Manual.

Installing the GSC 10

note: If you do not have a GSC 10, you can skip this step.

Both magnets must be aligned with their respective indication lines for the Edge to receive data.

1.Place the GSC 10 on the rear chain stay (on the side opposite the drive train).

NOTE: Place the flat rubber pad or the triangle-shaped rubber pad between the GSC 10 and the chain stay for stability.

Edge 500 Quick Start Manual

7