Problems Solving | 46 | |
|
|
| Lamp or Temp indicator flashes orange | Warning |
| : lit | : flashing | : off | ||||
|
|
|
|
|
|
|
|
|
|
|
| Status | Cause |
| Remedy or Status |
|
|
| |
| Power | Red | High temperature warning | (This is not an abnormality, but if the temperature rises too high again, projection will stop |
| ||||
|
|
| automatically.) |
|
|
| |||
|
|
|
|
|
|
|
| ||
|
|
|
|
| •Check that the air filters and air exhaust vent are clear and that they are not up against a surface | ||||
|
| Orange |
|
| such as a wall. |
|
|
| |
|
|
|
| •If the air filters are clogged, clean or replace them. sp.57, p.63 |
|
|
| ||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| Power |
| Lamp replacement notification | Replace the lamp with a new one. sp.59 |
|
|
| ||
|
| Orange |
|
| If you continue to use the lamp after it has passed the replacement period, the possibility that the | ||||
|
|
|
| lamp may break will increase. Replace the lamp with a new one as soon as possible. The Power | |||||
|
|
|
|
| indicator status will vary depending on the projector status at the time. |
|
|
| |
|
|
|
|
|
|
|
|
|
|
•If the projector is not operating properly even though the indicators are all showing normal, refer to "When the Indicators Provide No Help" on the following page.
•If an indicator is showing a status which does not appear in the previous tables, contact your dealer or the nearest address provided in the "International Warranty Conditions" section of the Safety