fēnix™ 2 Quick Start Manual

Getting Started

WARNING

See the Important Safety and Product Information guide in the product box for product warnings and other important information.

Charging the Device
NOTICE

To prevent corrosion, thoroughly dry the contacts and the surrounding area before charging or對 connecting to a computer

The device is powered by a built-in lithium-ion battery that you can charge using a standard wall outlet or a USB port on your computer.

1Plug the USB end of the cable into the AC adapter or a computer USB port.2Plug the AC adapter into a standard對 wall outlet3 Align the left side of the charging cradle with the groove on

À

the left side of the device.4 Align the hinged side of the charger with the contacts on

Á

the back of the device.When you connect the device to a power source, the device turns on.5Charge the device completely.
Keys
LIGHT Select to turn the backlight on and對 off

À

Hold to turn the device on and off 對or to lock the keysSTART Select to start or stop an activity對

Á

STOP Select to choose an option in a men對uBACK Select to return to the previous pa對ge

Â

LAP Select to record a lap or a rest du對ring an activity
DOWN Select to scroll through the data pages, options,

Ã

messages, and settings.Select to read a long message or no對tification Hold to mark a waypoint.UP Select to scroll through the data pages, options,

Ä

MENU messages, and settings.Select to dismiss a short message o對r notification Hold to view the main menu.
Viewing the Data Pages

Customizable data pages allow you to quickly access real-time data from internal and connected se對nsors.⁜爀 圀栀攀渀 礀漀甀 猀琀愀爀琀  activity, additional data pages app對ear

From the time of day page or any data page, select UP or DOWN to cycle through the data pages.

Locking the Keys
You can lock the keys to prevent in對advertent key presses1Select the data page you want to view while the keys are locked.2Hold LIGHT for two seconds, and select Lock to lock the keys.3Hold LIGHT for two seconds to unlock the keys.

Activities

Your device can be used for a variety of outdoor, athletic, and fitness activities.⁜爀 圀栀攀渀 礀漀甀 猀琀愀爀對琀 愀渀 愀挀琀椀瘀椀琀礀Ⰰ 琀栀攀 搀攀瘀椀挀攀 搀椀猀瀀氀愀 and records sensor data about your 對activity.⁜爀 夀漀甀 挀愀渀 猀愀 activities and share them with the Garmin Connect™ community.

The device functions differently de對pending on your activity.⁜爀 䘀 example, data pages, recorded data, and menu options may appear differently based on your ac對tivity

Starting an Activity

When you start an activity that req對uires GPS, GPS turns on automatically.⁜爀 圀栀攀渀 礀漀甀 猀琀漀瀀 琀栀攀 對愀挀琀椀瘀椀琀礀Ⰰ 䜀倀匀ꀀ琀甀爀渀猀 漀昀昀Ⰰ 愀 the device returns to low-power mod對e

1Select START.2 Select an activity.

3If necessary, follow the on-screen instructions to enter additional information.

4If necessary, wait while the device connects to your ANT⁜™ sensors.

5If the activity requires GPS, go outside, and wait while the device locates satellites.

6Select START to start the timer.NOTE: The device does not record your activity data until you start the timer.
Stopping an Activity
NOTE: Some options are not available for 對some activities1Select STOP.2Select an option:•To reset your activity, select Reset.

This resets the timer and clears all recorded data since you started the activity.

•To record a lap, select Lap.

•To follow your track back to the starting point of your activity, select TracBack.

•To resume your activity, select Resume.•To save the activity and return to low-power mode, select
Save.
•To discard the activity and return to low-power mode, select Discard.
February 2014

190-01730-01_0B

Printed in Taiwan