Garmin GMR 21/41 Radar Page, Configuring the Radar Page, PAGE, Radar, System, ADJ/MENU, To view the Radar Page:, To add or remove functions on the Radar Page:

Radar Page

With the radar properly installed, when you turn on your Garmin Marine Network chartplotter, it should detect the radar as a new network connection.

Note: A software update may be needed for the radar to function properly. If the message “Incompatible Software Version” appears when you turn on your chartplotter, you must update your chartplotter software. A software update card is provided with the GMR 21/41.

When the new radar is detected, the Radar Page is added to the page sequence. If the Radar Page is not available, press and hold ADJ/MENU to open the Main Menu. Highlight the System tab, and select Radar from the Services list at the bottom of the General sub tab.

To view the Radar Page:

Press PAGE repeatedly until the Radar Page appears.

Basic Operation > Radar Page

Radar Page

Configuring the Radar Page

You can customize the appearance of the Radar Page.

note: For detailed information about configuring Digital 1 and Digital 2 data fields, see your chartplotter owner’s manual.

To add or remove functions on the Radar Page:

1.Open the Radar Page, and then press and hold the DATA/CNFG key to open the Configuration window.

GMR 21/41 Owner’s Manual 3