instructions
Sensor Accuracy Range: From 0°C to 40°C (From 32°F to 104°F)
Radio frequency/protocol: 2.4 GHz ANT™
System Compatibility: ANT+™
Limited Warranty
Garmin’s standard limited warranty applies to this accessory. For more information, see the Important Safety and Product Information in the Garmin product box.
From -10°C to 60°C (From 14°F
Operating temperature: to 140°F)
3. Remove the cover and the battery.
4. Place the new battery into the cover with the positive side facing the inside of the cover.
5. Replace cover by aligning the dots and rotating clockwise.
Technical Specifications
Physical size: L × W × H: 35 mm × 25 mm × 7.5 mm (excluding clip)
Weight: 10 g (including battery)
Water Resistance: 10 m
Transmission range: Minimum 3 m (9.8 ft.)
Speed and distance accuracy: Uncalibrated 95%, calibrated 98%
Battery: User-replaceable CR2032 (3 volts) Perchlorate Material – special handling may apply. See www.dtsc
.ca.gov/hazardouswaste/perchlorate. Battery life: 400 hours run time
2. Twist the cover counter-clockwise until it is loose enough to remove.
To replace the battery:
EN 1. Locate the circular battery cover on the back of the foot pod. Unlock Lock