Installation of the USB Data Card Programmer and Device Drivers

1.Connect the USB connector on the end of the Programmer cable to the USB port on the back of the computer. Most computers have two USB Ports. Either port will work. The computer does not need to be turned off when connecting or dsconnecting the Programmer.

IUse care to insert the USB connector correctly. Do not force the connection as this may damage the USB port on your computer or the USB connector on the Programmer.

After connecting the Programmer to your computer you must install the device drivers from the CD-ROM provided with the Programmer.

2.Insert the Programmer CD-ROM into your computer’s CD-ROM drive.

3.The computer will recognize the Programmer as a USB device and open the Add New Hardware Wizard and search for the device drivers. Click on “Next”. If, for some reason, the Wizard does not run automatically, click the Start button and select “Settings” and then “Control Panel”. Double click on the “Add New Hardware” icon.

4.The next screen will ask you if you want it to search for the best driver for your device or if you want to display a list to choose from. Select “Search for the best driver for your device” and click on “Next”.

Installation

Connecting the Programmer to

Your Computer

USB Connector

Programmer Cable

USB Port

USB (Universal Serial Bus) Port

and USB Connector

Installing the Device Drivers

1