Installation

Installing the Device Drivers

Installing the MapSource

Software Upgrade

2

5.The next screen will display a list of locations to search for the new drivers. Select CD-ROM Device from the list and click on “Next”. Make certain all other boxes remain unchecked.

6.The Wizard will search for the driver and then display a window to tell you it is ready to install. Click on “Next”. You may see a “Copying Files...” screen which tells you the file cannot be found. Choose Root Directory of the CD-ROM drive if not already there, and to try copying again. Click “OK” to continue.

7.When installation is complete a window will display that shows the device name (GARMIN USB Data Card Programmer) and states the driver installation is finished. Click on “Finish” .

8.A final window will appear telling you that operating software for the Card Programmer is being installed. Leave the CD-ROM in the CD-ROM drive to complete the MapSource Software Upgrade.

To Install the MapSource Software Upgrade including USB Data Card Programmer Support :

1.Insert the Programmer CD-ROM into your computer’s CD-ROM drive.

2.Click the Start button and select “Run...”

3.Then type in the drive letter of your CD-ROM drive followed by the MapSource Update file name: MSUPDATE.EXE. (For example d:\msupdate.exe)

4.Press ENTER and follow on-screen instructions.

5.Open MapSource and check the “About” box in the help file to determine that you have successfully installed Version 3.04 or later.

6.Follow instructions contained in the MapSource Addendum provided with the USB Data Card Programmer for transfer of map data to and from Data Cards using the Programmer.