Gateway 2701HG-B manual USB Connection, Gateway Connected Via USB Macintosh

Appendix A: Install the Gateway on Other Operating Systems

USB Connection

Note: Connecting your computer to the gateway using USB requires an available USB port. Only one Windows or Macintosh computer can be directly connected to the 2Wire gateway using the USB connection. The following instructions are for Macintosh computers running OS 9.x.

Figure 8. Gateway Connected Via USB (Macintosh)

1.Install DSL phone filters according to the instructions on page 2.

2.Insert the 2Wire CD in the computer’s CD-ROM drive.

3.Double-click the 2Wire CD icon on your desktop.

4.Double-click 2Wire USB to begin the driver installation.

5.If you have set up an administrator name and password, the Authenticate screen opens. Enter your administrator name and password and click OK.

6.Follow the on-screen instructions. When the driver installation is complete, you will be prompted to restart your computer.

7.After your computer restarts, connect the provided blue USB cable from the USB-PCport on the 2Wire gateway to your computer’s USB port.

8.Open the network Control Panel by selecting the Apple icon > Control Panel > TCP/IP.

21