Make sure that the power button on your LCD TV is turned off.

Using VGA video

Important You cannot use VGA video as a Picture-in-Picture (PIP) source.

To connect your computer using VGA video:

1

2 Connect the 15-pin D-Sub VGA connector on your computer to the VGA IN connector on the back of your LCD TV.

3 Connect the Audio Out jack on your computer to the VGA R/L Audio jack on the back of your LCD TV.

4 Restart your LCD TV. See “Turning on the power” on page 10.

5 Select VGA using the INPUT button on the front of your LCD TV.

You should be able to see a picture. If you do not, make sure that all connections are secure and you have selected the correct video input source. Press the AUTO button on the front of your LCD TV if necessary.

www.gateway.com

25