3Align the front of the cabinet mounting rail to the front mounting bracket by sliding the inner rail and inner slide until the rail screw hole opening lines up with one of the front mounting bracket screw holes.

Back mounting bracket

Inner rail

Front mounting bracket

Spring latch

Screw

4Attach the front of the cabinet mounting rail to the front mounting bracket using a screw from the accessory kit.

5Attach the second screw to the front mounting bracket by repeating Steps 3 and 4.

6Mount the second cabinet mounting rail on the opposite side of the cabinet by repeating Steps 1 through 5.

7Go to “Mounting the system drawer in the cabinet” on page 9.

Installing generic mounting brackets

If you are installing the server in a non-Gateway cabinet, use the generic mounting brackets. These brackets allow for different cabinet depths. If generic mounting brackets are already installed in the cabinet, go to “Installing the cabinet mounting rails onto generic brackets” on page 7.

Installing the cabinet mounting brackets and mounting rails

5