Installing the cabinet mounting rails onto generic brackets

To install the cabinet mounting rails onto generic brackets:

1Align the back end of the cabinet mounting rail to the back mounting bracket by sliding the inner rail forward (if the spring latch locks the inner rail into place, free the rail by releasing the spring latch).

Star washer

Hex nut

Back mounting bracket

Spring latch

Inner slide

Inner rail

2Attach the back end of the cabinet mounting rail to the back mounting bracket using two screws, hex nuts, and star washers from the accessory kit.

One screw must be located in the last back bracket screw hole. The second screw can be located in any of the other back bracket long screw holes.

Installing the cabinet mounting brackets and mounting rails

7