Important!

Shielded cables are required by the FCC.

Setting up the server

Refer to Figure 1 and the following procedures when connecting optional peripherals to your system.

Figure 1: Connecting Peripherals

1.Connect the keyboard and mouse to their respective ports using the pictures on the server’s rear cover as a guide.

2.Connect the monitor video cable to the video port. The location of the port may vary depending on whether you use the integrated video or a video card.

3.Connect the monitor power cable to an AC outlet or, preferably, a surge control outlet station.

4.Verify that the voltage selector switch on the power supply is set for the proper voltage (115V or 230V). If the system includes two hot-swap modules, each module has a voltage selector switch.

4 Gateway ALR 8200 User’s Guide