Basic features

Intel Pentium® II processor (speed depends on the model)

Autodetection of 66/100-MHz memory bus for all processor speeds to accommodate processors using either memory bus speed

SMP design supporting up to two processor modulesIntel MP Specification V1.1 and 1.4 compliant32-bit PCI and 16-bit ISA bus master64-bit processor and memory data pathExtended PCI-to-PCI bridge support

64-MB Error Checking and Correcting (ECC) memory, expandable to 1-GB using ECC 72-bit SDRAM DIMMs

Integrated 2-MB DRAM PCI Graphics (Cirrus Logic GD54M30)

Eight expansion slots: five PCI, one shared PCI/RAIDport, one shared PCI/ISA, and one ISA slot

Integrated PCI Ultra2 SCSI (Adaptec 7890) with two 68-pin connectors, dual-channel Ultra-DMA PCI IDE interface, and floppy controller supporting 1.44 MB and 2.88 MB formats.

RAIDport ready: the shared PCI/RAIDport slot supports the addition of a RAIDport card to provide RAID capability.

Low voltage differential (LVD) support for SCSI devices. LVD SCSI allows faster disk access and greater data integrity

Power supply unit that supports dual 400 W redundant power supply modules with hot swap capability. The system ships with a single module. If you install the optional second module, the power supply supports load sharing and N+1 fault tolerance.

Phoenix upgradable Flash BIOS, Year 2000 Ready

The system is equipped with InforManager™ (IFM), a special feature consisting of both hardware and software designed to monitor and report the operating status of the system and its

devices: CPUs, power supplies, RAM, ambient temperatures, voltages, and fan operation. For further information about the InforManager™, refer to the InforManager™ User’s Guide.

10 Gateway ALR 8200 User’s Guide