Gateway D2B manual Introduction, Connections, Electrical Installation, Audio 10/30, v1.0

Models: D2B

1 2
Download 2 pages 38.88 Kb
Page 1
Image 1
1 Introduction

1 Introduction

Gateway Lite emulates a CD changer and uses CD changer controls to access offboard audio sources like iPod and USB devices.

2 Connections

Gateway Lite D2B

Installation Guide

v1.0

4 Electrical Installation

(2.) Join the power harness of the Gateway Lite to the radio.

Plug the power cable lead to the Gateway Lite D2B.

The allocation of the #1 cable is the following: Red: + 12V battery

Black: GND

Purple: wakeup

See the pinout of the Mercedes power harness of different head units.

Audio 10/30

3 Installation

The best place to install the Gateway Lite D2B maybe somewhere behind the dashboard/head unit. Remove the car’s head unit from the dashboard according to car manufacturer instructions. If you do not have a CD changer in your car, please make sure that the head unit can control a CD changer (e.g. products light at optical output socket of the head unit.) If not, please refer to an official Mercedes service, where they can easily reprogram the head unit to enable the optical network for Gateway Lite D2B. If you finished this step or you made sure that the car’s D2B network can accept a CD changer or a CD Changer exists in your car please do the

GWL-9211-1following.

Page 1
Image 1
Gateway manual Introduction, Connections, Electrical Installation, Audio 10/30, Gateway Lite D2B Installation Guide