5 Electrical Installation
If you have a Comand head unit the socket of the radio is different from the other head units.
Comand 2.0/2.5
7 | Optical Installation | 8 | Optical Installation |
6 Optical Installation
Mercedes cars can have two different layouts of optical network. That is why the D2B optical kit contains two different optical harnesses (labels on them will help). The #22 belongs to the cars with Comand (made by Bosch) head units and #21 to the others.(3. and 4.) Unplug the connector of the optical harness from the head unit and connect it to the #21/22 socket of the optical harness of the Ice>Link Gateway 500. If there is no factory fitted optical cable connected to the Head Unit, you should connect the given #23 optical loop to the spare female connector of the #22 optical cable.
(5.) Connect the #21/22 A connector to the back of head unit.
(6.) Plug the last flying connector of your optical harness to the Gateway Lite D2B interface, with this step you are connected to the D2B optical ring.
Finally connect each cable according to the numbers in the first picture. Lead away the cables where the devices will be placed. (E.g the glove compartment or the center console).
9 Test and refit
Test the Gateway Lite with your car audio, making sure all connections are correct and that you have full functionality.
Note: If during testing you notice any changes or inconsistencies in the way the car’s electrical system operates, disconnect the Gateway product immediately and consult your dealer.
Take care not to trap any wires and cables or the Dension product. Refit is the reversal of the removal process for your specific vehicle, as per your manufacturer’s instructions.
All photos/illustrations are for representation purposes only and may differ visually from the equipment in your vehicle. Information correct at time of going to print E. & O. E. Dension Audio Sytems Ltd. and it’s registered partners cannot be held liable for any damages caused by the incorrect installation of any Dension product.
Need more help?
Please visit: www.dension.com/support
