Close the case by following the instructions in “Closing the case” on page 56. Reconnect the cables and the power cord.
Turn on your computer. Windows starts and the Windows desktop appears.

3 If you are removing a DIMM from the memory module bank, gently pull the plastic tabs away from the sides of the memory module and remove it.

- OR -

If you are adding a DIMM to an empty memory module bank, gently pull the plastic tabs away from the sides of the memory module bank.

4 Align the notches on the new DIMM with the notches on the memory module bank and press the module firmly into the bank. The tabs on the sides of the memory module should secure the memory module automatically. When the module is secure, you hear a click.

5

6

7

8 Click Start, Control Panel, then click Performance and Maintenance (if in Category view). Click/Double-clickSystem. The amount of memory in your computer is shown at the bottom of the System Properties dialog box in the General tab.

58

www.gateway.com