Gateway E-4300 Closing the case, Removing the front bezel, To close the case:, To remove the front bezel:

Closing the case

To close the case:

1 Make sure that all of the internal cables are arranged inside the case so they will not be pinched when you close the case.

2

3

4

5

Align the tabs on the front of the panel into the case notches.

Swing the side panel toward the case until it is flush with the side of the case.

Replace the thumbscrews.

Reconnect the cables and power cord.

Removing the front bezel

Some upgrading procedures may require you to remove the front bezel.

To remove the front bezel:

1 Open the case by following the instructions in “Opening the case” on page 60.

2 In the lower front area of the case, press the two bezel retention tabs outward until the lower part of the bezel detaches from the case.

www.gateway.com 61