
4 If you are removing a DIMM from the memory module bank, gently pull the plastic tabs away from the sides of the memory module and remove it.
- OR -
If you are adding a DIMM to an empty memory module bank, gently pull the plastic tabs away from the sides of the memory module bank.
5 Align the notches on the new DIMM with the notches on the memory module bank and press the module firmly into the bank. The tabs on the sides of the memory module should secure the memory module automatically. When the module is secure, you hear a click.
6 Replace the side panel by following the instructions in “Replacing the side panel” on page 51.
7
8
9
10 Click Start, Control Panel, then click Performance and Maintenance (if in Category view).
54 | www.gateway.com |