www.gateway.com

10Holding the new backplane by the edges only, align it with the locking tabs on the backplane bracket, then place it on the locking tabs (1) and slide it to the right until it click into place.

Caution

Make sure you do not pinch, bind, or damage any cables as you install the backplane.

11Insert the backplane assembly into the chassis (2), then press down on the assembly until the locking tabs on the chassis engage the holes on the right and left sides of the bracket.

12Reconnect all cables to the backplane.

13Replace the system fans and fan cage, and the fan duct by following the instructions in “Replacing system fans” on page 38.

14Follow the instructions in “Closing the server case” on page 27.

15Reinstall the hot-swap drives back into the server. Make sure that you install the drives into the same bays you removed them from in Step 4. For instructions see “Removing and installing a hard drive” on page 29.

16Replace the bezel by snapping it into place on the front of the server.

Installing and removing an optional mezzanine board

For information on installing or removing the optional mezzanine board, refer to the Mazzanine Board User Guide.

47