Gateway FPD1975W Starting the monitor

Starting the monitor www.gateway.com

6Turn on the speaker bar by rotating the power/volume knob clockwise.

Starting the monitor

Important

The appearance of your monitor may vary from that shown.

To start the monitor:

1Press the power button on the front of monitor. The power LED on the power button turns on.

2Turn on your computer.

After your computer is running, the power LED on the monitor’s power button should be blue. Allow about 10 seconds for the display image to appear. If the power LED is not blue or you do not see a display image, check the connections. For more troubleshooting information, see “Troubleshooting” on page 22.

3Adjust the tilt of the monitor for the best viewing angle.

12