Using Your Gateway Flat-panel Monitor

Setting up the optional speaker bar

Power/Volume control

Kensington lock slot

Power indicator

Headphone jack

Microphone jack Headphone jack

 

 

 

 

Bass port

(for bass sound). Do

Bass port

not block.

 

 

Installing the speaker bar

To install the speaker bar:

Tip

When using the speaker bar with a DVI connection, we recommend that you use the right-angle DVI cable so the speaker bar does not obstruct the cable.

1Tilt the screen back, then center the speaker bar below the screen. Make sure that the speakers face forward.

2Tighten the two thumbscrews on the back of the speaker bar.

3Connect the speaker bar’s USB power cord to any available USB port on your computer.

4Connect the speaker bar’s headphone (green) and microphone (pink) cables to your computer’s headphone and microphone jacks.

5If it is not already on, turn on your computer.

10